|IPv4/IPv6 Route:||512/256||MAC Address Table:||16K|
|VLAN ID:||4K||Flash Memory Capacity:||8MB|
|External Dimension:||440mm*285mm*44mm||Power Supply Features:||AC: 110V～260V|
10 Gigabit Fiber Optic Switch,
L2 Fiber Optic Switch,
SFP+ Data Center Switch
10 Gigabit Data Center Switch L2 12 10G SFP+ Optical ports 8 10 / 100 / 1000M RJ45
12+8+1 10Gigabit Data Center Switch is layer 2 non-blocking switch with Broadcom chip. Providing 258Gbps switching capacity and 192Mpps forwarding performance, L2 / L3 full wire-speed forwarding. Its flexible networking capability ensures the stability of the network and the balance of the load link. With the modular design, it provides 12 10G SFP+ optical ports, 8 10/100/1000M RJ45 electrical ports, 1 Console port, 1 OOB management port, which offer enough bandwidth for data aggregation and data exchange. And in order to flexibly respond to the network requirements, users can select appropriate 10G ports according to their needs.With high bandwidth and low latency, pipe network., OFS-6410-12HC located in density of the next generation of data center and cloud computing network access, can also be used for large Internet cafes, the core of enterprise network, metropolitan area network, or aggregation.
1. With 258Gbps backplane bandwidth, the industry the highest performance (1U TOR);
2. Hardware routing, wire speed packet rate reached 192Mpps, L2 / L3 forward full speed;
3. Able to be deployed in the Metropolitan Area Network and provide several last kilometer technology.
Safe and Reliable
1. Provide DOS, DDOS, spoofing and virus defense;
2. Support IEEE802.1x, provide port-based user authentication, network shield, safety control, and policy control technology;
3. Restrict the maximum number of hosts connected with the port, multi-binding Ethernet interface , increasing bandwidth and system redundancy;
4. Powerful ACL, support L2-L4 data filtering;
5. Policy control list and flow regulation.
Convenient in operation and maintenance
1. Support flexible port configuration;
2. Management support with Web, SNMP and telnet;
3.Support XModem protocol, use TFTP/ZMODEM to software upgrading and BootRom upgrading;
4.Support SFP+, also backwards compatible XFP;
5. Enter or exit low-power condition from PHY.
Powerful Flow and Broadcast Management
1. Automatically detect and control broadcast storm, support IGMP packets detection, effectively limit the flooding of broadcast packets;
2. Support Ethernet interface taking 1M as the step length for rate limiting.
3. Support full duplex mode and half duplex mode flow control;
4. Support IP multicast and QoS.
Product's Technical Parameters
|Fixed port||12 10G SFP+ optical ports, 8 10/100/1000M RJ45 electrical ports|
|Packet forwarding rate||192Mpps|
|Jumbo frames||12k bytes|
|Transfer mode||Support store-forward mode and cut-through mode|
|MAC address table||16K|
|Memory capacity||512MB DDR3 SDRAM|
|Flash memory capacity||8MB|
|CPU||600 MHz ARM Cortex-A9 single-core processor|
IP Source Guard binding
Port based VLAN
IP based VLAN
MAC based VLAN
|MAC address table||
Static MAC address table
Dynamic MAC address table
Half-duplex control based on the back pressure type
Full-duplex control based on the PAUSE frame
|Port Mirror||Support port mirror|
IEEE 802.1Q Congestion mechanism
Each port has 8 send queue mapping to 8 802.1p priority
|Spanning Tree Protocol||MSTP(802.1s),STP,RSTP|
|Multicast management||IGMP Snooping frame|
Support SNMP v1/v2
|Remote Upgrade||Support version upgrading via web Support version upgrading via local|
|Power Supply Features||AC: 110V～260V|
|Indicator light||Power indicator, system, connection/sending and receiving instructions|
Operating temperature: 0°C～50°C (0m～1800m) ;
Storage temperature: -40°C～+70°C;
Relative humidity: 5%RH～95%RH, Non-condensing.