|Place of Origin:||Guangdong, China(Mainland)|
|Minimum Order Quantity:||2 pieces|
|Packaging Details:||26 (high) x 70 (width) x 93 (length) mm|
|Delivery Time:||3-5 Working Days after Payment Received|
|Payment Terms:||T/T, L/C, Western Union, Paypal|
|Supply Ability:||10000 Pieces per Month|
|Temperature:||-20 - +70||Data Buffer:||256K|
|MAC Adress Cable:||4 K||Delivery Detail:||3-5 Working Days After Payment Received|
|Packaging Details:||According To Customer's Requirements||Power:||External|
|Optical Mode:||Single Or Dual||1000m Sfp Media Converter:||SFP To SFP|
fiber optic media converter,
optical media converter
2 × 1.25G to 2.5G Gigabit Ethernet Media Converter , SFP to SFP
2×1.25G to 2.5G Gigabit Ethernet Multiplexer
The OFS-GAS-3 Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system’s transmits- sion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports.The multiplexer must be used in couples
◆ Attach one 2.5G SFP module to SFP1 Cage on the Multiplexer. Attach two 1.25G SFP modules to SFP2 and SFP3 Cage on the Multiplexer.
◆ Link fiber from the SFP1 on one Multiplexer with SFP1 on another Multiplexer. It can link through CWDM system.
◆ Link fiber from the SFP2 and SFP3 on the Multiplexer to Gigabit Ethernet Service.
Note: SFP2 on one Multiplexer link pass only with SFP2 on another Multiplexer. SFP3 on one Multiplexer link pass only with SFP3 on another Multiplexer.
◆ Connect the power cord to the Multiplexer and check that the Power LED lights up. The Px LEDs will light when all the cable connections satisfactory.
|Standerds||IEEE 802.3AB 1000Base-T1000Base-SX/LX/LH|
|Data Transfer Rate||2.5Gbps for SFP1, 1Gbps for SFP2 and SFP3.|
|LED Indicators||Power, P1 2.5G, P1 Link/Act, P2 Link/Act,P3 Link/Act|
|Ambient Temperature||0 ～ 50℃|
|Humidity||5% ～ 90%|
Three ports Gigabit Ethernet Multiplexer with two 1.25G SFP ports and one 2.5G SFP port.